manualshive.com logo in svg

Microplex M204, Installation And Configuration Manual

Share
Download
Microplex M204 Installation And Configuration Manual Download Page 58

50

CONFIGURING THE M204 FOR TCP/IP: Host Configuration

FTP’s package also provides Windows printing along with several other software
packages on the market. These are just two possible applications that will work with
the M204. Please see the user manuals of the appropriate applications for more infor-
mation.

Direct Socket Printing

The Print Server provides a socket interface for custom printing applications. Pro-
grams can open a TCP connection to a TCP port on the Print Server. The specified
port number corresponds to a destination on the Print Server, and data is processed
according to the model associated with this destination. Please see list pserver on page
87, list dest on page 86, and list model on page 87 for more details.

npwrite is a sample program that performs this way. It is included in the host software
shipped with your M204. For examples, please refer to Direct Printing Without the
Spooler on page 30.

FTP Daemon

The FTP Daemon provides an additional method to submit print jobs to the M204. For
a complete discussion of printing and other M204 functions using the FTP Daemon,
please see FTP Daemon on page 134.

Now that your TCP/IP host is configured for printing, please look to the following for
further configuration options:

•

Add to or change configuration of your M204. Please see USING THE M204’S
COMMAND SET on page 81.

•

Utilize more advanced features of the Print Server. Please see USING THE
M204’S ADDITIONAL OPTIONS on page 119.

Note

Summary of Contents for M204













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands