Microplex M204, Installation And Configuration Manual

Page: 97 / 204

USING THE M204’S COMMAND SET: npsh Command Set 89
list user
list user [
userid|all]
List current settings of a particular user indicated by userid, or all users. Cur-
rent settings include user ID and permissions.
See also: User Accounts and Permissions on page 82, list logins on page 87,
and set user on page 104.
list var
list var
List current settings of all variables.
See also: Variable Definitions on page 163, set var on page 104, and Vari-
ables on page 79.
load
load
Load the settings stored in EEPROM and use them as the current settings.
These settings include: destinations, models, logpaths, user, TCP, I/O ports,
variables, system information, and portmaps. This does not affect network
parameters. Use this after a power failure to restore settings saved in
EEPROM.
load default
Load the factory settings and use them as the current settings. Use this in
combination with store net from default when reinstalling the Print Server.
See also: save on page 91 and store tcpip on page 110.
lp
lp options -d destname
Print to the M204 using standard TCP/IP rsh/rcmd/remsh. destname is the
name of the M204 destination. This command in default mode will show any
parallel port printer errors to the user. The options are:
-v Show incremental byte counts as the job is printing and show
the job’s position in the queue as it moves to the top.