Microplex M204, Installation And Configuration Manual

Page: 102 / 204

94 USING THE M204’S COMMAND SET: npsh Command Set
set com1 4800 cs7 cstopb parodd
sets COM1 to 4800 bps (bits per second), 7 data bits, 2 stop bits, and odd
parity.
See also: list com1|com2 on page 85.
set date
set date
year month day
Set the current date. year is four digits, month is from 1 to 12, and day is the
number in the month.
See also: list date on page 86.
set dest
set dest destname alternate alternatedestname
Set up an alternate destination for the print job if that particular destname’s
printer is busy already. alternatedestname is the alternate destination to send
to.
See also: Making An Alternate Print Destination on page 122.
set dest
destname backchannel [com1|com2]
Establish a return path for printer feedback when printing to a non-bidirec-
tional parallel port. backchannel can be a serial I/O port.
set dest destname ioport prn1|prn2|com1|com2
Associate a destination with an I/O port so that jobs sent to that destination
appear on the specified port.
set dest
destname logpath logpathname
Associate a logpath with a destination. Please see set logpath on page 95 to
configure this logpathname.
set dest destname model modelname
Associate a model with a destination. Jobs sent to the named destination are
Example