Microplex M204 Installation And Configuration Manual Download Page 69

Page: 69 / 204

CONFIGURING THE M204 FOR NOVELL: Host Configuration

If you want to continue with any of the following procedures, please find them as indi-
cated in other sections of this manual:

•

Add to or change configuration of your M204. Please see USING THE M204’S
COMMAND SET on page 81.

•

Utilize more advanced features of the Print Server. Please see USING THE
M204’S ADDITIONAL OPTIONS on page 119.

Check the CURRENTLY
ATTACHED SERVERS once you
have gone into view the appropriate
queue.

You should see the Print Server’s name dis-
played (e.g. M_000BF5).

Press <Escape> until you are out of
PCONSOLE.

You will be back at the command line and
the M204 is now configured.

Step

Action

Result of Action

Summary of Contents for M204













































































































































































































Search results

Summary of Contents for M204

Reviews:

Microplex M204, Installation And Configuration Manual, Page: 69 / 204

Search results

Summary of Contents for M204

Reviews: