Microplex M204, Installation And Configuration Manual, Page: 80 / 204

72 CONFIGURING THE M204 FOR WINDOWS: Host Configuration
Through the COM Port on page 28 for detailed instructions.
Once you have configured the unit, you will notice the STAT LED flashing on once
per second. This means the M204 is configured and recognizable on the network. At
this point, you can now configure your host.
Host Configuration
Now that your workstation(s) and the M204 have IP addresses and netmasks, you can
now configure a print setup. There are several methods available depending on what
Windows package you are using. If you experience Windows-related printing prob-
lems after completing these setups, please see TROUBLESHOOTING THE M204 on
page 145 for more information.
Windows NT Version 3.5x
LPR Method
1 Create a print path and printer; select Main.
2 Select Control Panel.
3 Select Printers which loads up the Print Manager.
4 Select Create a Printer from the Printer menu.
5 Define the printer name and driver; in the Print to field, select Other....
6 Choose LPR port from the list that comes up and select OK.
7 Fill in the host name or IP address of the M204.
8 Fill in the destination or queue on the M204 (e.g. d1prn1) and select OK.
where:
destination Is a pre-defined destination or queue on the M204 that is automat-
ically mapped by default to an I/O port. For example, destination
d1prn1 is automatically mapped to the PRN1 port. Please see
Destinations on page 77 for a more detailed description. Please
note that destinations are case sensitive and are lowercase by
default.