Microplex M204, Installation And Configuration Manual

Page: 23 / 204

INSTALLING THE M204 ON THE NETWORK: Overview 15
INSTALLING THE M204 ON THE NETWORK
Overview
The first step of your M204 setup is to attach it to the network. This section tells you
how to do that and also covers the Print Server’s network interfaces.
Preparing for Installation
Before unpacking and installing the hardware, read the FCC Warning.
CE Mark Conformity Declaration
The Microplex M204 Print Server fulfils the requirements for radiated emission
according to limit B of EN55022/1987 and the requirements for immunity according
to EN50082-1/1992 residential, commercial, and light industry. Compliance is not
valid for unshielded network and printer cables. Also, the included plastic caps must
be place over any unused I/O port.
Unpacking the M204
Before unpacking the M204 Print Server, check the package for any obvious damage
FCC Warning
This equipment generates, uses and can radiate radio frequency energy.
If it is not installed and used as directed in this manual, interference to
radio communications may result. The equipment has been tested and
found to comply with the limits for a Class A computing device
pursuant to Subpart B of Part 15 of FCC rules, which are designed to
provide reasonable protection against such interference when operated
in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference. In such a case the user
will be required to correct the interference at the expense of the user.