Microplex M204, Installation And Configuration Manual

Page: 117 / 204

USING THE M204’S COMMAND SET: npsh Command Set 109
store pserver novell fserver add fservername
Adds a specified Novell file server as a preferred file server. This feature is
useful in a large Novell network so that the M204 does not ignore important
file servers. If this feature is not enabled, the M204 will only acknowledge the
first 16 file servers it senses.
store pserver novell fserver del fservername
Deletes a particular Novell file server from the M204’s list of preferred file
servers.
store pserver novell opts [[-]spxkeepalive]
Allows users to disable the keepalive packets sent by the M204 to the host in
order to maintain an SPX connection. The [-] disables spxkeepalive.
store pserver novell passwd [ password]
Store the password for the Print Server to use when logging in to the file
server. This password must match the password set in PCONSOLE.
store pserver novell polltime [
time]
Store the time (in seconds) between polling by the M204 to see if print jobs
are in the queue on the file server. This is applicable to a PSERVER setup
only.
The M204’s NET LED will flash according to this polltime.
store pserver smb workgrp workgroupname
Store the Print Server’s workgroup name for Microsoft Networks (i.e. Win-
dows for Workgroups, Windows NT, and Windows 95). Microsoft Networks
use these names to organize groups of computers into workgroups so that
when browsing certain functions, users see only computers belonging to a
particular workgroup rather than all the computers on the network.
If no workgroupname has been specified, the default name is WORKGROUP
(note all capitals). This is a standard Windows default.
Note
Note