manualshive.com logo in svg

Microplex M204, Installation And Configuration Manual

Share
Download
Microplex M204 Installation And Configuration Manual Download Page 121

USING NPWIN: Overview

113

USING NPWIN

Overview

NPWin is an SNMP-based software utility that allows you to perform all unit configu-
ration and management in a point-and-click, Windows environment. NPWin provides
all the same configuration and management functionality available with the built-in
npsh command set. NPWin also includes an extensive, context-sensitive, on-line help
system to explain the features and how they work.

System Requirements

NPWin requires a workstation capable of running Windows 3.11, Windows NT, or
Windows 95. The workstation must also be configured with an IP address and net-
mask, have TCP/IP services available, and be on the same local IP network as the
M204.

A Windows workstation on a Novell IPX network will not be able to communicate
with the M204.

Please read the SETUP.TXT file for a list of compatible TCP/IP stacks.

Installation

Please follow the steps below to install the NPWin software on to your Windows
workstation:

1

Start File Manager.

2

Insert disk labelled NPWin into drive A.

3

Double-click on the SETUP.EXE icon and answer the dialogue boxes as they
appear.

The installation scripts take the following actions:

•

asks for a directory name, the default is c:\npwin

•

installs several files into this directory

Note

Note

Summary of Contents for M204













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands