Microplex M204, Installation And Configuration Manual

Page: 92 / 204

84 USING THE M204’S COMMAND SET: npsh Command Set
cancel
cancel
jobid
Delete a job from the M204’s internal queue.
See also: lpstat on page 90.
chr
chr arguments
Used with redirection, the chr command sends output control codes to the
printer. Separate arguments with spaces. Arguments can be a combination of
words, any printable character, or the common set of $BS, $TAB, $ESC,
$DEL, $EOF, $NULL, $FF, $LF, or 0xhh (hexadecimal code for any charac-
ter).
chr $LF
causes an extra linefeed before the next prompt.
See also: Redirecting Output from Commands on page 82.
Debug Commands
The debug set of commands displays detailed debugging information about
memory, the network interface, and protocols.
debug
debug ip|lpq|mem|netbios|nif|novell|tcp
Display debugging information for a particular module.
disable
disable ioportname|destname
Disable the specified I/O port so jobs are queued but not printed or disable the
specified destination so any new jobs are rejected. ioportname is one of the
four I/O ports and destname is the name of one of the M204 destinations.
See also: enable on page 85, list dest on page 86, list com1|com2 on page 85,
and list prn1|prn2 on page 87.
Example