Microplex M204, Installation And Configuration Manual

Page: 127 / 204

USING THE M204’S ADDITIONAL OPTIONS: Overview 119
USING THE M204’S ADDITIONAL OPTIONS
Overview
As of now, you will have configured your M204 and you’re probably printing to it suc-
cessfully. The purpose of this chapter is to enhance your print setup by describing
some of the additional features that the Print Server provides. It is broken down into
the following sections:
1 General Options on page 119: network security, changing the Print Server’s
name, manipulating the UTP interface, setting up special job processing, manipu-
lating the unit’s services, configuring an alternate print destination, capturing
printer feedback, and controlling frame types.
2 TCP/IP Options on page 124: restoring to factory defaults, getting ready for
complex networks, remotely managing the unit, TCP/IP network security, and
using the terminal sever capabilities.
3 Novell Options on page 128: setting password security and setting preferred file
servers.
4 Managing with SNMP on page 129: custom MIBs and traps, SNMP security,
and SNMP procedures.
5 FTP Daemon on page 134: FTP file system, printing using FTP, monitoring using
FTP, and configuring parameters using FTP.
6 Serial Line IP (SLIP) on page 141: configuring a serial port for SLIP.
7 IP Routing on page 145: the unit’s IP routing features.
General Options
Network Security
The M204 provides various built-in security methods to protect the Print Server and
its configuration. These include passwords and permission levels.
In addition, TCP/IP and Novell environments each have further security measures.
Please see Maintaining Network Security on page 126 and Setting Password Security