manualshive.com logo in svg

Microplex M204, Installation And Configuration Manual

Share
Download
Microplex M204 Installation And Configuration Manual Download Page 50

42

CONFIGURING THE M204 FOR TCP/IP: Host Configuration

npd Pseudo-device Interface

The npd pseudo-tty daemon is used when bi-directional communications is required
between the printer and printing application, and when changes to the printer’s inter-
face script are undesirable.

Some applications like Sun NeWSprint and Adobe TranScript work best with a bi-
directional communications channel to the printer because they can provide more
details on the printer status. For example, PostScript printers can send error messages
back to the application as they occur. npd is used in this case making use of the TCP
protocol and pseudo-tty device drivers.

Figure 3:

npd Overview

TCP/IP Host

M204

/dev/m204.prn1

npd watches over this device
and sends any print jobs over
to the M204.

The spooler

processes the job

and passes it to the

printer device.

printer

Summary of Contents for M204













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands