Microcom 360C, Operator'S Manual

Page: 206 / 297

205
Message Description
PRESS OK BUTTON
[ERRCODE]:WIRELESS STARTUP ERROR
The wireless LAN module is not correctly connected
to the machine.
Correctly connect the wireless LAN module to the
machine or turn the machine off and then on again.
Press «OK» button to clear this message.
PRESS OK BUTTON [ERRCODE]:
WIRELESS SETTINGS ARE
INCOMPLETE
The wireless LAN settings are insufficient.
Press «OK» button to clear this message.
PRESS OK BUTTON
[ERRCODE]:NOT CONNECTED TO WIRELESS
ACCESS POINT
The machine is not connected to the wireless access
point.
Press «OK» button to clear this message.
NETWORK CONFIG
WRITING
Network related settings are being configured.
WAIT A MOMENT
NETWORK INITIAL
Network related settings are being initialized.
DOWNLOAD MESSAGE
PROCESSING
Message data for updating is being processed.
DOWNLOAD MESSAGE
WRITING
Message data for updating is being written.
DOWNLOAD MESSAGE
SUCCESS
Writing of message data for updating succeeded.
The machine then restarts.
DOWNLOAD MESSAGE
FAILED[ERRCODE]
Writing of message data for updating failed.
PRESS OK BUTTON FOR RESTORATION
[ERRCODE]:RECEIVING DATA TIMEOUT
A timeout has occurred while receiving data.
This error is automatically cleared after approximately
15 seconds.
PLEASE TRY AGAIN
[ERRCODE]:FW UPDATE ERROR.IF NETWORK
DOESN'T WORK,PLEASE TRY FW UPDATE OVER
USB
Failed to update the firmware.
Execute the firmware update again.
LOAD [MEDIA_SIZE]
490 :FEEDER EMPTY
The paper has run out. Load paper to the machine.
REPLACE TONER
412:TONER EMPTY
The toner has run out. Replace the toner cartridge
with a new one.
TONER NOT RECOMMENDED
556:ERROR
Replace the toner cartridge with a recommended
one.
INSTALL TONER
[ERRCODE]:TONER MISSING
A toner cartridge is not installed in the machine. Set
the toner cartridge in the machine.
IMAGE DRUM NOT RECOMMENDED
692, 702, 706, 686:ERROR
Replace the image drum unit with a recommended
one.