Microcom 360C, Operator'S Manual

Page: 162 / 297

161
4
Pull up the blue handle at the front of the machine interior and pull out the fuser unit
vertically.
Burns may result.
Since the fuser unit gets hot, carry out the operation carefully, and make sure
to hold it by the handle when lifting it up. When it is hot, do not attempt to
carry out the operations. Wait until it is cooled down and then carry out the
operations.
5
Hold the blue handle of a new fuser unit, align the red
▲ on the right side and the red ▼ in
the machine, and lower it vertically to set the unit in the machine.
6
Turn down the blue handle of the fuser unit toward you to put it away.