METREL EurotestAT MI 3101 Instruction Manual Download Page 88

Page: 88 / 136

MI 3101 EurotestAT: Data handling

Operation with barcode scanner

6.8

Operation with barcode scanner

Instruments (hardware version HW 5 or higher) support operation with barcode scanner.
The main application is to identify barcode labeled installation structure elements.

How to read data with barcode scanner:



Connect barcode scanner to PS/2 communication port



In ‘Edit location menu’ (see chapter 6.6, figure 6.18) the location name can be
alternatively read from barcode.

Note



Proper operation is assured only with barcode scanners supplied by METREL.



For support of different barcode format refer to Barcode reader’s manual.



Maximal length of barcode is 10 characters.

Summary of Contents for EurotestAT MI 3101









































































































































Search results

Summary of Contents for EurotestAT MI 3101

Reviews:

Related manuals for EurotestAT MI 3101

Brands by name

Popular brands

METREL EurotestAT MI 3101, Instruction Manual

Search results

Summary of Contents for EurotestAT MI 3101

Reviews:

Related manuals for EurotestAT MI 3101

Brands by name

Popular brands