MI 3101 EurotestAT: Data handling
Editing installation data structure
85
6.6 Editing installation data structure
Installation data structure when once stored in the instrument can also be modified during
use of the instrument. Editing possibilities are:
Adding new location – see
6.6.1
,
Modifying the name of selected location,
Clearing location / tree structure, see
6.5.1
.
The possibilities are accessible in save, recall and clear (partly) menus.
6.6.1 Adding new locations
Note
:
The structure can be expanded to 10 horizontal levels deep and with maximum
2000 storing locations.
Keys:
/
/
/
Select the existing location.
Pressed for a few seconds in some cases
- add a new location in the
structure, see
6.6.1
.
F2
Enters installation structure tree view to select appropriate location.
F1
Renames the current location.
ESC
Back to the last operation mode of the instrument.
(for 2 seconds)
Opens dialog box for adding new location at the same level.
Active only if selected location is the last in the level.
Name of the new location:
Same name as pr1.
(for 2 seconds)
Opens dialog box for adding new location at the next sublevel.
Active only if there are no sublevels at the selected location.
Name of the new location:
Location
Keys in open dialog box:
/
Select YES / NO.
TEST
Confirms selected option.
ESC
Cancels dialog box without changes.
An example for opening a new location and storing a test result into the location is
presented below.
Finished test with the results prepared for
saving
is marked with
icon.
Figure 6.15: Test result prepared for saving
