262391
65
Revision A
3.16
Unplugging Rotary Disc Header
The cutterbar and conditioner can get plugged with crop and may require unplugging.
DANGER
To prevent injury or death from the unexpected start-up of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
DANGER
Ensure that all bystanders have cleared the area.
WARNING
Wear heavy gloves when working around cutterbar.
1.
Stop forward movement of the tractor and stop the power take-off (PTO).
2.
Raise the header fully.
3.
Shut down the engine, and remove the key from the ignition.
4.
Engage the lift cylinder lock-out valves. For instructions, refer to
3.2.1 Locking and Unlocking Auxiliary Lift Cylinders,
5.
Open the cutterbar doors. For instructions, refer to
3.4.1 Opening Cutterbar Doors, page 26
1026469
A
B
Figure 3.57: Cutterbars
A -Eight Disc Cutterbar
B - Ten Disc Cutterbar
6.
Clean off the cutterbar and conditioner rolls by hand.
7.
Close the cutterbar doors. For instructions, refer to
