262391
166
Revision A
A
ϭϬϰϮϳϯϳ
Figure 4.156: Safecut Spindle-Nut Wrench Location
9.
Remove the M12 bolt securing Safecut spindle-nut
wrench (A) to its storage location. Remove the Safecut
spindle-nut wrench.
1019153
A
B
C
Figure 4.157: Cutterbar Spindles
IMPORTANT:
•
Spindles that rotate clockwise have right-leading threading
and a smooth top on the spindle gear shaft (A).
•
Spindles that rotate counterclockwise have left-leading
threading and machined grooves on the spindle gear shaft (B)
and nut (C).
•
If the spindle position in the cutterbar has changed, the
rotational direction of that spindle
MUST
remain the same
(that is, a clockwise spindle must maintain its clockwise
rotation). Failure to maintain the rotation pattern can result
in damage to the spindle and/or to the cutterbar
components.
1026444
A
Figure 4.158: Cutterbar Spindle
10. Remove two M10 bolts and washers (A).
