262391
174
Revision A
ϭϬϰϯϲϬϴ
A
Figure 4.174: Left Driveshield
1.
Remove driveshield (A). For instructions, refer to
1010701
A
Figure 4.175: Backside of Driveshield
2.
Remove and retain hex nut and flat washer (A) securing the
latch to the backside of the driveshield.
3.
Remove the latch and replace it with the new part.
4.
Reinstall retained hex nut and flat washer (A).
1010185
A
B
Figure 4.176: Stud and Clip Assembly
5.
Remove two carriage bolts (A), replace stud and clip
assembly (B) if it is worn or damaged, and reinstall the
carriage bolts.
NOTE:
R1 Pull-Type shown in the illustration; R1 FR similar.
6.
Reinstall the driveshield. For instructions, refer to
