262391
74
Revision A
ü
Check roll timing gearbox lubricant. Refer
to
Checking and Changing Lubricant in
Conditioner Roll Timing Gearbox, page
188
.
ü
Check header drive gearbox lubricant.
Refer to
Header Drive Gearbox , page 191
.
Every 250 Hours or Annually
6
p
Change cutterbar lubricant. Refer to
and
Cutterbar with Lubricant, page 95
.
7
.
p
Change roll timing gearbox lubricant.
Refer to
Lubricant in Conditioner Roll Timing
Gearbox, page 188
p
Change cutterbar-conditioner drive
gearbox lubricant. Refer to
Drive Gearbox (T-Gearbox) , page 194
and
Cutterbar / Conditioner Drive Gearbox ,
page 193
.
p
Change header drive gearbox lubricant.
Refer to
and
.
4.3.2
Break-in Inspections
From the factory the header is ready for normal operation. However, there are several maintenance tasks to complete
during the early operating hours of the machine
’
s service life.
Table 4.1 Break-In Inspection Schedule
Inspection
Interval
Item
Refer to
1
Hour
Check for loose hardware and tighten
to required torque
7.1 Torque Specifications, page 211
5
Hours
Check for loose hardware and tighten
to required torque
7.1 Torque Specifications, page 211
5
Hours
Check conditioner drive belt tension
Inspecting Conditioner Drive Belt, page 182
25
Hours
Check conditioner drive belt tension
Inspecting Conditioner Drive Belt, page 182
50
Hours
Check conditioner drive belt tension
Inspecting Conditioner Drive Belt, page 182
50
Hours
Change conditioner roll timing
gearbox lubricant
Checking and Changing Lubricant in Conditioner Roll Timing
Gearbox, page 188
6.
Change all gearbox and cutterbar lubricants annually.
7.
Use only the specified amount. Do
NOT
overfill.
