262391
193
Revision A
ϭϬϰϯϴϲϵ
A
Figure 4.205: Drive Gearbox
–
Viewed from Below
6.
Clean around drain plug (A) on the bottom facing side of
the gearbox.
7.
Place a 2 liter (2.11 qts [US]) container under drain plug (A).
8.
Remove drain plug (A).
9.
When lubricant has drained completely, reinstall the drain
plug and add lubricant to the gearbox. For instructions,
refer to
Conditioner Drive Gearbox , page 193
.
NOTE:
For lubricant specifications, refer to the inside back cover of
this manual.
10. Clean up spilled lubricant.
IMPORTANT:
Ensure no objects or tools are left on the cutterbar.
4.5.9
Cutterbar / Conditioner Drive Gearbox
The cutterbar/conditioner drive gearbox transfers power from the header drive gearbox to the conditioner and cutterbar.
1019340
A
Figure 4.206: Left Drive Compartment
The cutterbar-conditioner drive gearbox (A), located inside the
drive compartment on the left side of the header, transfers
power from the header drive gearbox to the conditioner and
cutterbar.
NOTE:
If the gearbox requires repair, contact your MacDon dealer.
For service intervals, refer to
.
Checking and Adding Lubricant
–
Cutterbar / Conditioner Drive Gearbox
The cutterbar/conditioner drive gearbox is located inside the drive compartment at the left side of the header.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
DANGER
Ensure that all bystanders have cleared the area.
1.
Lower the header on to level ground.
