262391
88
Revision A
1020979
A
B
Figure 4.18: Inboard Curtain
5.
Remove two M10 carriage head bolts (A) and nuts securing
curtain assembly (B) to the rotary disc header, and remove
the curtain assembly.
NOTE:
R1 SP for windrowers shown in the illustration; R1 FR
similar.
1020981
A
B
B
Figure 4.19: Inboard Curtain
6.
Remove four nuts (A) from the studs on the center shield.
7.
Remove two curtain brackets (B). Remove the curtain.
Installing Cutterbar Inboard Curtain
Be sure not to overtighten the nuts when the inboard curtain is installed.
DANGER
To prevent injury or death from the unexpected start-up or fall of a raised machine, always stop the engine and remove
the key from the ignition before leaving the operator
’
s seat or making adjustments to the machine. If the rotary disc
header is raised, always close the lock-out valves, and place blocks under the header. Never work on or beneath an
unsupported header.
DANGER
Ensure that all bystanders have cleared the area.
WARNING
Disc blades have two sharp cutting edges that can cause serious injury. Exercise caution and wear gloves when working
with, or near, blades.
1.
Position the rotary disc header at an appropriate height for the task.
2.
Shut down the engine, and remove the key from the ignition.
