98
Temperature sensor
The LUPUSEC-XT temperature sensor measures the
temperature at the place of installation and transmits
any change directly to the control unit every 2 minutes.
Product description:
1.
Temperature probe
2.
Internal control LED
3.
Test button
Put the temperature sensor into operation
1.
Unscrew the screw at the sensor bottom and open the housing.
2.
Start the control unit’s configuration menu and open the menu Sensors
Add.
Click Start.
3.
Press the Test button of the temperature sensor for approx. 15 to 20 seconds.
4.
After a few seconds, the control unit menu should list the temperature sensor.
5.
If the sensor is not recognized, restart at step 2.
6.
Add the temperature sensor and assign a name.
Battery:
The temperature sensor requires a 1/2 AA, 3 V lithium battery. The average battery
life is one year minimum. The sensor will inform the control unit in case of a battery
running low.
Note:
The temperature sensor operates within the 2.4 GHz range and is thus prone to
interference with WLAN and other radio signal within this frequency range.
The temperature sensor is
not
compatible with the wireless repeater.
The operating temperature is between -10 °C and +50 °C.
