104
Install the mechanical locking device to the door and put it into operation
Installation to doorframe (without bracket):
Figure 1
Figure 2
As shown in the assembly figures 1 and 2, the locking device must be sunk into the
frame (
without bracket
). This is usually possible with wooden frames only. It is
essential that the door reaches at least up to half of the doorframe and the magnetic
plate is installed in parallel to the locking device (figure 1). Finally, you need to fix the
magnetic plate at the door and drill the hole (depth 1.6 cm; width 1.4 cm Ø) for the
bolt.
1.
Locking device bolt
2.
Magnetic plate
