80
Wireless outdoor siren
Product description:
1.
Mounting holes
2.
Tamper contact
3.
DIP switches
4.
Lock screw
5.
On/off switch
Scope of delivery:
4 x dowels
4 x 1.5 V D alkaline batteries
Put the wireless outdoor siren into operation
1.
Open the wireless outdoor siren by unscrewing the screw at the bottom.
2.
Turn the on/off switch (5) to ON. A brief signal tone sounds.
3.
A blue switch bay with altogether seven switches is located in the middle of the
electronic component. By default, they are all set to OFF (down).
4.
The following table lists the functions of the switches:
SW1
Mode to add the siren to the control unit (then
back to OFF)
OFF
Off
ON
On
SW2
Not occupied
SW3
SW4
Alarm duration
OFF
OFF
3 minutes (default setting)
ON
OFF
5 minutes (not allowed in Germany)
OFF
ON
10 minutes (not allowed in Germany)
ON
ON
One second (Test mode)
SW5
Not occupied
SW6
Reset memory
OFF
Normal
ON
Deletes memory
SW7
Sends a status signal to the control unit
OFF
Off
ON
On
5.
Start the control unit’s configuration page, open the menu “Sensors”
“Add” and
