38
Cameras
In the Cameras menu, you can integrate all LUPUSNET HD IP cameras as well as
the LUPUSTEC-LE800+ and LE800 D1 series into the LUPUSEC-XT1. You can add
a maximum of four cameras. In theory, you can show pictures from any
camera/recorder, if the device has an MJPEG path, which you need to enter. Please
refer to the product manual in this regard or contact the product manufacturer.
To add a
LUPUSNET HD IP camera
, enter a link according to the following
syntax in one of the „URL camera“ boxes:
http://Username:Password@Camera-IP-
ADDRESS:PORT/GetData.cgi?CH=Streamnumber
Example of a camera integration:
User name: admin
Password: admin
IP address: test.lupus-ddns.de
Port: 10030
Stream 2: ?CH=2
In the example, the link needs to look as follows:
http://admin:[email protected]:10030/GetData.cgi?CH=2
The command “/GetData.cgi” shows the camera’s JPEG stream, which transmits at
up to 25 frames/second. If the data volume is too big for your local network, you can
downsize the stream to a refreshment rate of one picture every three seconds. For
this purpose, use the following extension: “/GetImage.cgi?Size=640x480”
In our example, the link would look as follows:
