31
Range
Test the sensor range with the “Range” function. After having successfully added a
sensor, click “Start” in the “Range” menu. Take the sensor to the intended point of
installation. Press the Test button of the sensor for a certain time (see sensor
descriptions) to start the sensor test mode. If the control unit detects the sensor, it will
inform you with a short acoustic signal.
The “Signal strength” in the “Range” menu shows the reception quality. A signal
strength of 9 is the best possible value and a signal strength of 1 the worst possible.
To ensure a loss-free alarm signaling, this value should be at least 3.
Bypass
