92
Note (only wireless sockets with electric meter):
The power consumption in Watt and the state (on/off) is displayed via Sensors
List
Status.
You can activate or deactivate the PSS wireless socket manually via Home
Overview
Control or alternatively via Sensors
List (on/off).
Put the wireless socket (without electric meter) into operation
1.
Plug the power device into a socket.
2.
Press the LED for 10 seconds minimum. The LED starts flashing slowly (Test
mode).
3.
Start the control unit’s configuration menu and open the menu Sensors
Wireless sockets. Click “Add” behind one of the eight channels.
4.
If the system recognizes the power device, the LED blinks fast twice and goes
off.
5.
Optionally assign the wireless socket with a name.
6.
Connect the end device.
Note:
You can activate or deactivate the wireless sockets without electric meter
manually via Home
Overview
Control or alternatively via Control unit
Wireless switches (On/Off).
The maximum load at 230 V is 3680 W / 16 A. Do not exceed these values!
After a power failure, the wireless socket returns to the initial state within one
minute.
The wireless sockets are
not
compatible with the wireless repeater.
