29
Home mode
Sensors with the “Home mode” attribute will not trigger an alarm with the alarm
system in “Home mode”. An event code (#132) will be transmitted to an alarm
center (if available) anyway.
Note:
With the alarm system in “Armed mode”, the “Home mode” sensors will trigger a
burglary alarm as well.
Entrance delay
With the alarm system in “Armed” or “Home mode” and a sensor with the
“Entrance delay” attribute being triggered, you can disarm the system within a
certain time (see “Control unit
Settings
Delay upon entry”). An event
code (#704) will be transmitted to an alarm center (if available) during the
entrance delay.
Note:
If the alarm system is not disarmed during the entrance delay, an alarm is
triggered.
If the LUPUSEC-XT1 is in “Disarmed mode”, the control unit will sound a signal
tone, if the sensor is triggered, provided this function was activated in “Control
unit”
“Settings”
“Ring tone for entrance delay”. Only the internal siren of the
control unit can play this signal tone.
Entrance delay home mode
This new attribute combines the attributes of “Entrance delay” and “Home
mode”. With the control unit in home mode, the sensor will not trigger an
alarm. With the control unit in (full) arm mode, the sensor reacts like an
entrance delay sensor.
Home entry
With the alarm system in “Home mode” and a sensor with the “Home entry”
attribute being triggered, you can disarm the system within a certain time (see
“Control unit
Settings
Delay upon entry (home mode)”). An event code
(#130) will be transmitted to an alarm center (if available) during the entrance
delay.
Note:
If the alarm system is not disarmed during the entrance delay, an alarm is
triggered.
With the LUPUSEC-XT1 in „Armed mode“, the control unit will report a normal
burglary alarm, if a sensor with the “Home entry” attribute is triggered.
24 hours
A sensor with the “24 hours” attribute is always on alert, irrespective of
whether the alarm system is “armed”, “disarmed”, or in “Home mode”. If the
sensor is triggered, an event code (#130) is transmitted.
Fire
A sensor with the “Fire” attribute is always on alert, irrespective of whether the
alarm system is “armed”, “disarmed”, or in “Home mode”. If the sensor is
