54
Use this menu to reset all settings to default. If you want to keep the network
settings, tick the option “Keep network settings”.
Note:
A
full reset
including the deletion of all connected sensors is executed as follows:
Disconnect the XT1 entirely from the power supply (remove power supply unit and
deactivate the emergency battery on the back). Then hold the “Learn Button” on the
back of the device pressed and reconnect the power supply unit of the control unit.
All three status LEDs of the XT1 will flicker after about 10 to 15 seconds, then
release the “Learn Button”. The control unit is completely reset.
Log files
The log files of the LUPUSEC-XT1 contain information about the system booting
process as well as all network accesses and status reports of the network services.
