8
Hardware description
The LUPUSEC-XT1 control unit has three different control LEDs, which inform you
about the control unit’s status.
1.
Network status LED
Flashes green = network is being initialized or contact ID/notification
syntax faulty or not entered
Green on = network status and contact ID/notification syntax OK
Red on = network connection interrupted
Off = no power supply or system in “Add sensor mode”
2.
Burglar alarm LED
Flashes red = alarm currently active
Red on = control unit has an alarm in the system memory
Yellow on = central failure (e.g. low battery, open tamper contact, open
sensors are
not
shown here)
Off = no abnormal messages
3.
Power LED
Red on = system armed
Flashes red = system in Home mode
Green on = system disarmed
Flashes green = system in “Add sensor mode”
Off = system in “Range test mode”
1 2 3
