102
Install the magnetic locking device to the door and put it into operation
Installation to door frame:
Installation of metal place to door leaf:
We recommend installing the metal plate (5.) to the top of the door leaf opposite the
door hinge. Fix the drilling template to the inside of the door. You need a 0.3 cm and
a 0.57 cm drill to pre-drill the holes for the metal plate bracket. Use the 5.7 mm drill to
drill the middle hole in the template through the door and machine away an
indentation with a depth of 2.4 cm and a diameter of 0.9 cm Ø for the pinch screw
(9.) on the opposite side. The 4 mm holes on the outside are intended to fix the metal
plate horizontally. Before you attach the metal plate, you need to insert the metal
tubes (6.) into the metal plate (5.), using pincers. Push the Allen screw with
countersunk head (4.) through the metal plate (5.) and then through the two washers
(7. + 8.). Insert the Allen screw and the metal tubes in the appropriate holes; insert
the pinch screw (9.) in the indentation through the back of the door. Screw the Allen
screw into the pinch screw to fix the metal plate at the door.
Installation of bracket to door frame:
For the installation, at first remove the pre-assembled bracket (1.) from the magnetic
lock by unscrewing the two Allen screws at the front of the magnetic lock. Then fix the
bracket at the doorframe in parallel to the door leaf, using the two smaller
countersunk screws. Make sure that the magnetic locking device is flush with the
metal plate (5.) after the installation, by lifting the bracket and the magnetic lock to
the door before you fix it. Finally, reassemble the magnetic lock and the assembled
bracket, using the Allen screws.
1.
Bracket for magnetic
lock
2.
2.5 cm screw
3.
Magnetic lock
4.
Allen screw (0.5 cm)
5.
Metal plate
6.
Metal tube (horizontal
fixing)
7.
Washer (metal)
8.
Washer (rubber)
9.
Pinch screw
