50
Automation
In the Home automation menu, you can automatically arm or disarm the control unit
among other things at certain times and conditions, control any consumer device
(PSS) depending on status, alarm or temperature.
Note
:
After having established or changed an automation rule, save this setting by pressing
DONE
next to the automation rule and then
OK
on the bottom. If you do not want to
save the setting, press
RESET
or leave the menu item.
Example 1:
A wireless socket or in-wall relay is to turn off electricity consumers, e.g. TV set, in
order to avoid unnecessary standby power consumption, when you leave the house
(the alarm system is armed).
Settings:
Connect a (PSS) wireless socket (see sensor instructions) to the control unit
(in our example, this is zone 2).
Go to menu “Settings”
“Automation”
Click EDIT in line 1
Select CONDITION
CHANGE MODE
ARM
.
Go to SCHEDULE and select ALWAYS
Go to ACTION and select SWITCH ZONE OFF
ZONE 1
From then on, whenever you leave the house and arm the alarm system, the XT1 will
turn off the respective PSS wireless socket Zone 1, and you save energy. Similarly,
you can configure the same rule for the HOME mode. To reactivate your TV, when
you come home, you need to set up a second rule:
In the Home Automation menu, click CHANGE in line 2
Select CONDITION
CHANGE MODE
DISARM
Go to SCHEDULE and select ALWAYS
