Lenovo ThinkCentre Edge 3484, Hardware Maintenance Manual

Page: 158 / 170

4. Connect a new keyboard or mouse to one of the USB connectors on the computer. Depending on
where you want to connect the new keyboard or mouse, see “Locating connectors, controls, and
indicators on the front of your computer” on page 74 or “Locating connectors on the rear of your
computer” on page 75.
Figure 99. Connecting the USB keyboard or mouse
5. To complete the installation or replacement, go to “Completing the parts replacement” on page 154.
Completing the parts replacement
After completing the installation or replacement for all parts, you need to reinstall the computer cover and
reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Chapter 6 “Using the Setup Utility program” on page 55.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1. Make sure that all components have been reassembled correctly and that no tools or loose screws
are left inside your computer. See “Locating major FRUs and CRUs” on page 76 for the locations of
various components in your computer.
2. Make sure that the cables are routed correctly. Keep cables clear of the hinges and sides of the
computer chassis to avoid interference with closing the computer cover.
3. Lower the drive bay assembly. See “Accessing the system board components and drives” on page 118.
4. If you have removed the front bezel, reinstall it. See “Removing and reinstalling the front bezel” on
page 117.
154
ThinkCentre Hardware Maintenance Manual