manualshive.com logo in svg

Lenovo System x3630 M4, Installation And Service Manual

The Lenovo System x3630 M4 is a powerful and reliable server designed to meet the demands of modern businesses. To help you get the most out of your investment, we offer a detailed and comprehensive Product Manual, available for free download from our website. Discover all the features, functionalities, and setup instructions to optimize your server's performance.

Share
Download
background image

000

000

00000

00000

00000

00000

00000

Media cage

Step 9.

Remove the front USB and video connector assembly from the media cage (see “Removing the
front USB and video connector assembly inside media cage” on page 260).

Step 10. Remove the operator information panel from the media cage (see “Removing the operator

information panel” on page 248).

Step 11. Remove the CD/DVD drive from the media cage (see “Removing a CD/DVD drive” on page 198).

Step 12. If you are instructed to return the media cage, follow all packaging instructions, and use any

packaging materials for shipping that are supplied to you.

Replacing the media cage

Use this information to replace the media cage.

To install the media cage, complete the following steps:

Step 1.

Install the front USB and video connector assembly into the media cage (see “Replacing the front
USB and video connector assembly inside media cage” on page 262).

Step 2.

Install the operator information panel into the media cage (see “Replacing the operator information
panel” on page 252.)

Step 3.

Install the CD/DVD drive into the media cage (see “Replacing a CD/DVD drive” on page 200).

Step 4.

Carefully push the media cage back into the server.

Chapter 6

.

Removing and replacing components

207

Summary of Contents for System x3630 M4



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3630 M4

NEC Univerge SV9100 System Maintenance Manual preview
Univerge SV9100
Brand: NEC Pages: 78
NEC UNIVERGE SL2100 Manual preview
UNIVERGE SL2100
Brand: NEC Pages: 34
NEC SV8500 Overview preview
SV8500
Brand: NEC Pages: 2
NEC SV8500 Operation And Maintenance Manual preview
SV8500
Brand: NEC Pages: 975
Advantech EKI-152X series User Manual preview
EKI-152X series
Brand: Advantech Pages: 94
HPE ProLiant m710x User And Maintenance Manual preview
ProLiant m710x
Brand: HPE Pages: 58
PalatiumCare Palcare PAL-211401 Install Manual preview
Palcare PAL-211401
Brand: PalatiumCare Pages: 64
CNET CNP-101U Hardware User'S Manual preview
CNP-101U
Brand: CNET Pages: 14
Aviosys IP Video 9100B User Manual preview
IP Video 9100B
Brand: Aviosys Pages: 30
Viavi Gen2 GigaStor Hardware Installation preview
Gen2 GigaStor
Brand: Viavi Pages: 7
Datum TYMSERVE 2000 Operation And Technical Manual preview
TYMSERVE 2000
Brand: Datum Pages: 54
Viavi G4-10G-010-96T Manual preview
G4-10G-010-96T
Brand: Viavi Pages: 12
NASdeluxe NDL-2400R-R User Manual preview
NDL-2400R-R
Brand: NASdeluxe Pages: 94
Xiva musicm8 User Manual preview
musicm8
Brand: Xiva Pages: 37
SMC Networks FieldServer FS-8700-60 Gardner Denver Driver Manual preview
FieldServer FS-8700-60 Gardner Denver
Brand: SMC Networks Pages: 13
Repotec RP-WUP201 Manual preview
RP-WUP201
Brand: Repotec Pages: 41
Synology 16-disk storage server User Manual preview
16-disk storage server
Brand: Synology Pages: 14
3S IA0641 Manual preview
IA0641
Brand: 3S Pages: 41

Brands by name

Popular brands

Load more brands