Lenovo System x3630 M4, Installation And Service Manual

Page: 24 / 1050

Off mode power (watts):
18
Noise levels (the declared A-weighed sound power level of the computer):
See Acoustical noise emissions.
Test voltage and frequency:
230V / 50 Hz or 60 Hz
Total harmonic distortion of the electricity supply system:
The maximum harmonic content of the input voltage waveform will be equal or less than 2%. The
qualification is compliant with EN 61000-3-2.
Information and documentation on the instrumentation set-up and circuits used for electrical testing:
ENERGY STAR Test Method for Computer Servers; ECOVA Generalized Test Protocol for Calculating
the Energy Efficiency of Internal Ac-Dc and Dc-Dc Power Supplies.
Measurement methodology used to determine information in this document:
ENERGY STAR Servers Version 2.0 Program Requirements; ECOVA Generalized Test Protocol for
Calculating the Energy Efficiency of Internal Ac-Dc and Dc-Dc Power Supplies.
What your server offers
The server uses the following features and technologies.
• Features on Demand If a Features on Demand feature is integrated in the server or in an optional device
that is installed in the server, you can purchase an activation key to activate the feature. For information
about Features on Demand, see https://fod.lenovo.com/lkms.
• Integrated Management Module II The integrated management module II (IMM2) is the second
generation of the IMM. The IMM2 is the common management controller for Lenovo System x hardware.
The IMM2 consolidates multiple management functions in a single chip on the server system board.
Some of the features that are unique to the IMM2 are enhanced performance, expanded compatibility
with blade servers, higher-resolution remote video, expanded security options, and Feature on Demand
enablement for hardware and firmware options.
For additional information, see “Using the integrated management module II” on page 105.
Note: The IMM interface can display storage RAID information provided that your server has the following
hardware installed:
– One or two Intel Xeon E5-2600 V2 series processors
– One ServeRAID adapter in slot 3 or slot 5
• UEFI-compliant server firmware Lenovo System x Server Firmware (server firmware) offers several
features, including Unified Extensible Firmware Interface (UEFI) 2.1 compliance; Active Energy Manager
technology; enhanced reliability, availability, and serviceability (RAS) capabilities; and basic input/output
system (BIOS) compatibility support. UEFI replaces the BIOS and defines a standard interface between
the operating system, platform firmware, and external devices. UEFI-compliant System x servers are
capable of booting UEFI-compliant operating systems, BIOS-based operating systems, and BIOS-based
adapters as well as UEFI-compliant adapters.
Note: The server does not support DOS (Disk Operating System).
• Dynamic System Analysis Preboot diagnostics programs The Dynamic System Analysis (DSA)
Preboot diagnostics programs are stored on the integrated USB memory. It collects and analyzes
system information to aid in diagnosing server problems. The diagnostic programs collect the following
information about the server:
– System configuration
– Network interfaces and settings
10
Lenovo System x3630 M4 Installation and Service Guide