Lenovo System x3630 M4, Installation And Service Manual

Page: 270 / 1050

000
000
Operator information
panel cable
Operator information panel
Screw
3. Install the screws to secure the operator information panel to the side of the server.
4. Slide the cable arm cover into the retention slots and install the screws to secure it on the side of
the chassis.
Note: The cable is routed on the outside of the chassis and connected to the system board. The cable
must be protected by the cable cover on the side of the chassis.
5. Reconnect the external cables; then, reconnect the power cords and turn on the peripheral devices
and the server.
Removing the system battery
Use this information to remove the system battery.
The following notes describe information that you must consider when replacing the battery:
• Lenovo has designed this product with your safety in mind. The lithium battery must be handled correctly
to avoid possible danger. If you replace the battery, you must adhere to the following instructions.
Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.
• If you replace the original lithium battery with a heavy-metal battery or a battery with heavy-metal
components, be aware of the following environmental consideration. Batteries and accumulators that
contain heavy metals must not be disposed of with normal domestic waste. They will be taken back
free of charge by the manufacturer, distributor, or representative, to be recycled or disposed of in a
proper manner.
• To order replacement batteries, call 1-800-IBM-SERV within the United States, and 1-800-465-7999 or
1-800-465-6666 within Canada. Outside the U.S. and Canada, call your support center or business
partner.
Note: After you replace the battery, you must reconfigure the server and reset the system date and time.
Statement 2
CAUTION:
When replacing the lithium battery, use only Part Number 33F8354 or an equivalent type battery
256
Lenovo System x3630 M4 Installation and Service Guide