Leica 14 9AUTO00C1 Instructions For Use Manual Download Page 83

Page: 83 / 120

HistoCore AUTOCUT

Optional Accessories

Caution

When using super mega-cassette clamp, the orientation is not set to position "0" when directional

fixture for specimen clamps is used with the rigid knife holder base, or the back-lighting illumination

is attached.

The instrument may malfunction leading to delayed diagnosis.

• The orientation must be in position "0" and the cover for backlighting illumination must be detached.

• NEVER use the super mega-cassette clamp with backlighting illumination.

• The force balance system has to be adjusted when using the super mega cassette clamp.

6.6

Top tray

Fig. 91

The top tray is mounted on the hood of the

microtome. The mark

(

→

"Fig. 91-

on both

the top tray and the hood helps to orient the

installation of the top tray.

The top tray is for storage of the utensils used

during sectioning as well as the sectioned

specimens.

6.7

Universal microscope carrier

Tips

Unpack all accessories in the package and check for completeness.

Summary of Contents for 14 9AUTO00C1

























































































































Search results

Summary of Contents for 14 9AUTO00C1

Reviews:

Related manuals for 14 9AUTO00C1

Brands by name

Popular brands

Leica 14 9AUTO00C1, Instructions For Use Manual

Search results

Summary of Contents for 14 9AUTO00C1

Reviews:

Related manuals for 14 9AUTO00C1

Brands by name

Popular brands