Leica 14 9AUTO00C1, Instructions For Use Manual

Page: 111 / 120

111 HistoCore AUTOCUT
Cleaning and Maintenance
8
Two-in-one blade holder E
Fig. 141
1
2
3
2
3
4
5
6
7
5
4
7
6
8
9
9
1. Remove the insert ( → "Fig. 141- 9 ") for low-profile blades.
2. Remove the pressure plate first ( → "Fig. 141- 4 ") from the clamping top. To do so, rotate the
blade clamping lever (
→
"Fig. 141- 6 ") counterclockwise and pull it out sideways; pull out the
bolt (
→
"Fig. 141- 7 ") and take the pressure plate off.
3. Remove the clamping top. To do so, rotate the clamping lever ( → "Fig. 141- 2 ") of the lateral
displacement counterclockwise and pull it out sideways; push the clamping top ( → "Fig. 141- 3 ")
until it can be removed from the segment arc ( → "Fig. 141- 5 ") .
4. Loosen the eccentric bolt using Allen key No. 4 and remove the segment arc from the blade
holder base.
5. Clean all parts of the two-in-one blade holder E.
Caution
During cleaning, the parts of blade holders are mixed up.
Poor section quality.
• Do not mix up blade holders during cleaning.