Leica 14 9AUTO00C1, Instructions For Use Manual

Page: 34 / 120

34 Version 1.1, Revision B
Setting up the instrument
4
Fig. 12
3
4
4
4
• Take out the accessory carton (optional
accessories) ( → "Fig. 12- 3 ") and the cartons
( → "Fig. 12- 4 ") for the standard scope of
delivery.
8
9
Fig. 13
5
6
7
• Take out the fixing module ( → "Fig. 13- 5 ") . To do
so, hold it by the top edge of the module and in
the recessed grip ( → "Fig. 13- 6 ") and pull it out
by pulling upwards.
• Remove the outer carton wall ( → "Fig. 13- 7 ") .
• Lift the instrument ( → "Fig. 13- 8 ") by holding it
by the base plate at the front (
→
"Fig. 14- 11 ")
and under the instrument on the back ( → "Fig.
14- 12 ") and lift it out of the formed cushion
( → "Fig. 13- 9 ") . (The instrument illustration is
provided as an example only.)
Fig. 14
10
11
12
• Place the instrument on a stable laboratory
table. The two sliding elements ( → "Fig. 14- 10 ")
located on the rear of the base plate make it
easier to move the instrument on the table.
• To move the instrument, hold it by the front of
the base plate ( → "Fig. 14- 11 ") , lift it up gently
and slide it on its slides.