Leica 14 9AUTO00C1, Instructions For Use Manual

Page: 68 / 120

68 Version 1.1, Revision B
Optional Accessories
6
6. Optional Accessories
6.1 Assembly for fixture for specimen clamps
Tips
Depending upon the purchase order, the basic instrument is delivered with the fine directional,
directional or rigid fixture for specimen clamps which must be assembled first. All specimen clamps
available as accessories can be used in one of the three fixtures for specimen clamps.
Before assembling the fixture for specimen clamps, activate the handwheel locking mechanism.
6.1.1 Rigid fixture for specimen clamps
Tips
Remove the rubber ring ( → "Fig. 68- 5 ") only after attaching the object head.
Fig. 68
2
4
5
1
3
Screw the rigid fixture for specimen clamps
(
→
"Fig. 68- 4 ") onto the object head (
→
"Fig. 68- 3 ") .
• Remove the screw ( → "Fig. 68- 1 ") , place the
specimen holder fixture ( → "Fig. 68- 4 ") onto the
object head (
→
"Fig. 68- 3 ") from the front and
tighten the screws (
→
"Fig. 68- 2 ") with an Allen
key No. 3.
• Next, insert the screw ( → "Fig. 68- 1 ") from the
side and briefly tighten it with an Allen key
No. 4.