Leica 14 9AUTO00C1, Instructions For Use Manual

Page: 107 / 120

107 HistoCore AUTOCUT
Troubleshooting
7
7.4 Malfunctions of the two-in-one blade holder E
7.4.1 Replacing the pressure plate
Fig. 137
Fig. 138
1
2
3
2
3
4
5
1. Bring the safety guard down ( → "Fig. 137- 1 ") .
2. Rotate the clamping lever counterclockwise ( → "Fig. 137- 2 ") .
3. Pull out the bolt ( → "Fig. 137- 3 ") ( → "Fig. 138- 3 ") .
4. Remove the damaged pressure plate ( → "Fig. 138- 4 ") .
Tips
Make sure that the insert of the clamping top is installed as shown ( → "Fig. 138- 5 ") in case it
falls out. If it is installed wrongly, the pressure plate cannot be clamped.
5. Install a new pressure plate.
6. Insert the bolt
( → "Fig. 138- 3 ") .
7. Rotate clamping lever clockwise (
→
"Fig. 138- 2 ") .