Leica 14 9AUTO00C1, Instructions For Use Manual

Page: 76 / 120

76 Version 1.1, Revision B
Optional Accessories
6
Fig. 78
1
2
3
4
5
6
7
8
9
• To mount the required insert ( → "Fig. 78- 1 ")
or ( → "Fig. 78- 2 ") or ( → "Fig. 78- 3 ") , turn the
clamping ring ( → "Fig. 78- 4 ") counterclockwise
and remove it.
• Place the required insert into the clamping
ring ( → "Fig. 78- 4 ") and screw the clamping
ring onto the thread ( → "Fig. 78- 5 ") by turning it
clockwise.
• Mount the specimen ( → "Fig. 78- 6 ") and clamp
it by turning the clamping ring ( → "Fig. 78- 4 ")
clockwise using the pin ( → "Fig. 78- 7 ") inserted
in hole ( → "Fig. 78- 9 ") .
• To orient the inserted specimen, insert the pin
( → "Fig. 78- 7 ") into the bore ( → "Fig. 78- 8 ") and
rotate it counterclockwise to release the clamp.
You can now rotate the specimen so that the
side you want faces upwards.
• To lock it in the position you have chosen,
tighten the bore ( → "Fig. 78- 8 ") by turning the
pin (
→
"Fig. 78- 7 ") clockwise. Remove the pin.
6.3 Knife holder base and knife holder
Fig. 79
1
The plastic handles of all clamping levers on the
instrument and knife holders can be turned to the
position that is most convenient for each user.
Pull the grip ( → "Fig. 79- 1 ") out of the lever, hold
it in this position, and rotate it to the desired
position. It will then lock automatically when
released.