Leica 14 9AUTO00C1, Instructions For Use Manual

Page: 37 / 120

37 HistoCore AUTOCUT
Setting up the instrument
4
4.5.3 Connecting the dummy plug
Fig. 17
1
2
3
Insert the dummy plug provided ( → "Fig. 17- 1 ") into the connecting jack ( → "Fig. 17- 2 ") on the rear of the
instrument and fasten it by tightening the screws ( → "Fig. 17- 3 ") .
4.5.4 Connecting the foot switch (optional accessory)
Fig. 18
2
1
3
4
If a foot switch is to be used with the instrument, insert the foot switch cable ( → "Fig. 18- 1 ") into the
connecting jack ( → "Fig. 18- 2 ") on the rear of the instrument and fasten it by tightening the screws
(
→
"Fig. 18- 3 ") .
Tip
If neither the dummy plug nor the foot switch is connected, the instrument is not ready for operation.
In this case, the emergency stop function is activated and the E-STOP LED ( → "Fig. 18- 4 ") on the
instrument is illuminated; the memory position is erased and the three-digit display indicates CLr
shortly.