Leica 14 9AUTO00C1, Instructions For Use Manual

Page: 24 / 120

24 Version 1.1, Revision B
Safety
2
Fig. 7
1
Knife holder E-TC
The safety guard on knife holder E-TC consists
of a foldaway handle (
→
"Fig. 7- 1 ") . To cover
the cutting edge, fold the safety guard handle
upwards.
Fig. 8
1
2
3
Two-in-one blade holder E for high and low
profile blades
The safety guard on the two-in-one blade holder
E consists of a red foldaway handle (
→
"Fig. 8- 1 ") .
To cover the cutting edge, fold the safety guard
handle upwards as illustrated in ( → "Fig. 8") .
Tip
The clamping levers on the two-in-one blade holder E are not interchangeable. The two clamping
levers (
→
"Fig. 8- 2 ") (
→
"Fig. 8- 3 ") must remain in the position shown at all times, as otherwise isolated
malfunctions of the two-in-one blade holder E can occur. The clamping lever for the blade ( → "Fig.
8- 2 ") is at the right side, the clamping lever for the lateral displacement ( → "Fig. 8- 3 ") is at left side.