Leica 14 9AUTO00C1, Instructions For Use Manual

Page: 78 / 120

78 Version 1.1, Revision B
Optional Accessories
6
6.3.3 Two-in-one blade holder E
Fig. 82
1
2
3
4
5
6
7
8
9
1 Blade ejector 6 Safety guard
2 Clamping top 7 Bolt
3 Clamping lever (left) 8 Clamping lever (right)
4 Segment arc 9 Pressure plate
5 Blade holder base
The two-in-one blade holder E is designed for conventional disposable blades and optimized to be used
with Surgipath disposable blades. It can be used for both high and low profile disposable blades. The
two-in-one blade holder E has a lateral displacement function, so that the entire width of the blade can
be used. It is equipped with a blade ejector to safely remove the blade after use. The pressure plate is
replaceable.
Tips
The clamping levers on the two-in-one blade holder E are not interchangeable. The two clamping
levers ( → "Fig. 82- 8 ") ( → "Fig. 82- 3 ") must remain in the position shown at all times, as otherwise
isolated malfunctions of the two-in-one blade holder E can occur.
Clamping lever for the blade
( → "Fig. 82- 8 ") is at the right, clamping lever for the lateral displacement
( → "Fig. 82- 3 ") is at the left.