Leica 14 9AUTO00C1 Instructions For Use Manual Download Page 64

Page: 64 / 120

Version 1.1, Revision B

Operation

5.8

Sectioning

Warning

Personnel with insufficient qualification working with the instrument.

Serious injury of persons and or specimen damage can occur when specimen approaches knife/

blade due to inappropriate operator actions, for example, because object head may drop onto knife

holder when handwheel is unlocked.

• Always make sure that only laboratory personnel with dedicated and sufficient training and

qualification operates the instrument.

• Always make sure that all laboratory personnel designated to operate this instrument has read

these Instructions for Use carefully and is familiar with all technical features of the instrument

before start working with it.

Warning

Personal protective equipment is not used.

Injury of persons.

• When working with microtomes, personal safety precautions must always be taken. It is

mandatory to wear work safety shoes, safety gloves, a mask and safety goggles.

Warning

Working with the instrument and brittle specimen without appropriate protective clothes.

Serious injury of persons by splinters while cutting brittle specimen.

• Always wear appropriate protective clothes (including safety goggles) and work especially

carefully when cutting brittle specimen.

Warning

Insufficient frame conditions for sectioning.

Specimen damage or poor sectioning results,for example, sections alternating in thickness,

compressed, folded or stripped sections.

• Do not continue sectioning if you recognize insufficient sections results.

• Make sure that all prerequisites for appropriate sectioning are met. Refer to the troubleshooting

section of these Instructions for Use for further details.

• If you do not have sufficient knowledge in regards of troubleshooting insufficient sectioning

results consult persons who do have that knowledge, for example, application experts of Leica

Biosystems.

Warning

Turning the handwheel counterclockwise.

People injury/Damage to specimen

• Do not turn the handwheel counterclockwise, which may lead to handwheel locking mechanism

malfunction.

Summary of Contents for 14 9AUTO00C1

























































































































Search results

Summary of Contents for 14 9AUTO00C1

Reviews:

Related manuals for 14 9AUTO00C1

Brands by name

Popular brands

Leica 14 9AUTO00C1, Instructions For Use Manual

Search results

Summary of Contents for 14 9AUTO00C1

Reviews:

Related manuals for 14 9AUTO00C1

Brands by name

Popular brands