LC Packings Probot 161403, User Manual

Page: 5 / 118

Table of Contents
User’s Manual Probot
D960R3
v
APPENDIX A
Dosage Module Purge Routine 1
A.1 Overview 1
A.1.1 The Step-By-Step Purge Routine 1
APPENDIX B
Peak Collection in Conjunction with CHROMELEON®
Software 1
B.1 Overview 1
B.2 Contact Closure Signals for Peak Detection with CHROMELEON 2
B.3 Setting up µ-Carrier for Peak Collection 3
B.4 Electrical Connections 6
B.5 Listing of the CHROMELEON Program used for this Example 6
B.6 Additional Hints/Troubleshooting 8
APPENDIX C
Table Alignment Instructions 1
C.1 Overview 1
C.2 Table Alignment 2
C.2.1 Leveling 2
C.2.2 Test Needle and
µ
Carrier Setup 2
C.2.3 Checking and Aligning of the X-axis and Y-axis 3
C.2.4 Alignment of the X-axis 4
C.2.5 Alignment of the Y-axis 4
APPENDIX D
The Vacuum Waste Removal Option 1
D.1 Overview 1
D.2 General Design 2
D.3 Setting up the Probot 3
D.3.1 Electrical Connections 3
D.3.2 Connecting the Vacuum Pump 3
D.3.3 Installing the Fused Silica Capillary 4
D.4 Setting up µCarrier and CHROMELEON
®
5
D.4.1 Enabling the Vacuum Waste Removal Option 5
D.4.2 Adjusting the Fused Silica Capillary and the Needle Height 5
D.4.3 Using the Waste Removal Option - Example 6
D.5 Listing of the CHROMELEON Example Program 8
D.6 Additional Hints/Troubleshooting 9
APPENDIX E
Installing and Using the Belkin
™
USB Video Adapter 1
E.1 Installation of the Belkin ™ VideoBusII ™ Image Capture Device 1
E.2 Software Installation and µCarrier Setup 2
E.2.1 Connecting the Camera and Displaying the Video Signal 2
E.2.2 Saving a the current Image or Recording a Sequence 4
E.2.3 Optimizing the Video Settings in µ Carrier 2.0 4
E.2.4 Troubleshooting 5
E.3 Uninstall Instructions 6