LC Packings Probot 161403, User Manual

Page: 60 / 118

Installation and Getting Started
2-40
D960R3
User’s Manual Probot
k) Select the pattern in which the spots are be used. Define the pattern for all
groups and confirm all settings with the Next Button.
FIGURE 2-42 The Fractionation Application Wizard – Standby Position
l) As the last step of the group definitions, the ‘Standby position’, where the
needle stays before and after each collection, needs to be defined. Frame this
position in the same way as described in the step above. Choose Next to
define a ‘special Z coordinate for horizontal movements’ (FIGURE 2-43).
FIGURE 2-43 The Fractionation Application Wizard – Z-Coordinate for Horizontal Movements