LC Packings Probot 161403, User Manual

Page: 42 / 118

Installation and Getting Started
2-22
D960R3
User’s Manual Probot
f) To remove the group, make sure that it is not used as ‘Collect group’ or
‘Standby position’ in a task, e.g. ‘Users’ must be ‘0’ (item 1, FIGURE 2-17).
Unselect if appropriate, and then use the Delete Group button.
Note: There is no need to change group settings of groups you do not intend to
use them. As an example, if you want to spot on the first target only, you do not
need to modify the groups 2 - 6. Just make sure that your task list is correct and
that these groups are not used.
2.7.4 B Checking/Modifying the Tasks List
If you changed the number of groups or if you want to perform fewer runs than
the total number of this predefined application, you may have to modify the task
list (FIGURE 2-18), e.g. to add, delete or modify tasks.
Task List
Tasks
Task Description
FIGURE 2-18 Available Tasks, Task List and Task Description
To delete a task in the task list, select the task and press the Del key on the
keyboard or click the right mouse key, and then select ‘Delete’.
To add a task to the task list:
a) Present ‘Tasks’ section (e.g. if the browser pane is currently visible) by
selecting the Show Browser button ((FIGURE 2-18)).
b) To add a new task, double click on the required task from the ‘Tasks’ section
presented in the left side of the window. The new task will be added to the
bottom of the task list (FIGURE 2-18).
Note: Selecting a task in the ‘Tasks’ section with one mouse click (rather than
double-click) will display the task description in the right side of the Application
Editor window (FIGURE 2-18).
c) Drag and drop the task to the desired position in the task list.
d) Check or modify the task parameters (Section 2.7.4 C).