LC Packings Probot 161403, User Manual

Page: 92 / 118

Appendix B
B-4
D960R3
User’s Manual Probot
To setup the fractionation task:
a) Set the collection control mode to External on the General tab (FIGURE B-4).
FIGURE B-4 General Settings of the Fractionation Task
b) Enter the flow rate of the LC system and the calculated volume between the
detector flow cell and Probot needle outlet. The delay time will be calculated
automatically according to the flow rate of the LC system and the calculated
volume (FIGURE B-4).
c) Define the primary collect group used for sample collection, select the Collect
peaks only option and define the waste group used to collect the mobile
phase in between the peaks on the Destination tab (FIGURE B-5).
FIGURE B-5 Destination Definitions of the Fractionation Task